Advance Electronic Industries

SALIENT FEATURES

· Designed to be used for all branches of Engineering

· Designed to learn writing Programs using C on PC to control through serial port

· Covers from Basic experiments to the advanced

· Fairly comprehensive and exhaustive Instruction Manual complete with theory, procedure and operating details.

· Housed in an elegantly cabinet with a well spread intelligently designed circuit layout on the front panel

TECHNICAL SPECIFICATIONS

· Microcontroller

# 51 series Microcontroller

# 9 pin Female D Connector to connect the serial port of the PC.

# 4 bit DIP Switch to select the program to be executed

# 8 pin Data port, 5 pin Status port and 4 pin Control port provided on connectors to connect to various applications

· 82C55 Interface

# Port A, Port B and Port C provided on connectors to connect various applications

# LED’s provided for all port lines to indicate the status.

# 8 pin Data port and 4 pin Control port provided on connectors to interface 82C55 to parallel port or serial port ( uC )

· LCD Display

# 16 x 2 LCD display with back light

# back light control

# 8 pin Data port and 4 pin Control port provided to interface to parallel port, serial port ( uC ) or 82C55

· Traffic Light

# 4 road junction

# Straight, Right, Left, Stop and Ready LEDs

# 8 bit Data lines provided on Data port for interfacing with parallel port, serial port ( uC ) or 82C55

# ADC control lines like RD, WR and INTR provided on connectors

· Relay

# Two relays with P, NC and NO contacts.

# Control of relays brought on Pin1 and Pin2 of Control connector

· Analog to Digital Controller

# 8 bit ADC

# Provision to connect Internal or External analog voltage source

# 8 bit Data lines provided on Data port for interfacing with parallel port, serial port ( uC ) or 82C55

# ADC control lines like RD, WR and INTR provided on connectors

· Digital to Analog Converter

# 8 bit DAC

# 8 data lines provided on Data port for interfacing with parallel port, serial port ( uC ) or 82C55

· Seven Segment Display

# Common Cathode type

# All segments including ‘ . ‘ are provided on Data port through buffer for interfacing with parallel port, serial port ( uC ) or 82C55.

· Stepper Motor

# +12V DC, 1.8o, 200 steps, Unipolar type

# ULN Driver

· DC Motor

# +12V DC Motor

# Driver using L293

# Control on connector

· Data Switch 2

# 5 push switches provided with normal High output

# Pull up resistors

# Switch status available on 5 pin connector

· LED’s

# 8 LED’s

# Control of LEDs on 8 pin Data port for interfacing to Parallel port, Serial port ( uC ) or 82C55

SPECIFICATIONS ARE SUBJECT TO CHANGE DUE TO CONSTANT DEVELOPMENTS WITH OUT ANY PRIOR NOTICE

SALIENT FEATURES

· Designed to be used for all branches of Engineering

· Designed to learn writing Programs using C on PC to control through Parallel port

· Covers from Basic experiments to the advanced

· Fairly comprehensive and exhaustive Instruction Manual complete with theory, procedure and operating details.

· Housed in an elegantly cabinet with a well spread intelligently designed circuit layout on the front panel

TECHNICAL SPECIFICATIONS

· Parallel Port

# 25 pin Female D Connector provided to connect to the parallel port of PC

# 8 pin data port, 5 pin status port and 4 pin control port provided for interfacing to various applications

· 82C55 Interface

# Port A, Port B and Port C provided on connectors to connect various applications

# LED’s provided for all port lines to indicate the status.

# 8 pin Data port and 4 pin Control port provided on connectors to interface 82C55 to parallel port or serial port ( uC )

· LCD Display

# 16 x 2 LCD display with back light

# back light control

# 8 pin Data port and 4 pin Control port provided to interface to parallel port, serial port ( uC ) or 82C55

· Traffic Light

# 4 road junction

# Straight, Right, Left, Stop and Ready LEDs

# 8 bit Data lines provided on Data port for interfacing with parallel port, serial port ( uC ) or 82C55

# ADC control lines like RD, WR and INTR provided on connectors

· Relay

# Two relays with P, NC and NO contacts.

# Control of relays brought on Pin1 and Pin2 of Control connector

 · Analog to Digital Controller

#       8 bit ADC

#       Provision to connect Internal or External analog voltage source

#       8 bit Data lines provided on Data port for interfacing with parallel port, serial port ( uC ) or 82C55

# ADC control lines like RD, WR and INTR provided on connectors

· Digital to Analog Converter

# 8 bit DAC

# 8 data lines provided on Data port for interfacing with parallel port, serial port ( uC ) or 82C55

· Seven Segment Display

# Common Cathode type

# All segments including ‘ . ‘ are provided on Data port through buffer for interfacing with parallel port, serial port ( uC ) or 82C55.

· Stepper Motor

# +12V DC, 1.8o, 200 steps, Unipolar type

# ULN Driver

· DC Motor

# +12V DC Motor

# Driver using L293

# Control on connector

· Data Switch 2

# 5 push switches provided with normal High output

# Pull up resistors

# Switch status available on 5 pin connector

· LED’s

# 8 LED’s

# Control of LEDs on 8 pin Data port for interfacing to Parallel port, Serial port ( uC ) or 82C55

SPECIFICATIONS ARE SUBJECT TO CHANGE DUE TO CONSTANT DEVELOPMENTS WITH OUT ANY PRIOR NOTICE

SALIENT FEATURES

· Designed to be used for all branches of Engineering

· Designed to learn and apply the graphical language of Labview to various applications

· Covers from Basic experiments to the advanced

· All experiments can be performed with the help of Labview Evaluation Software

· Fairly comprehensive and exhaustive Instruction Manual complete with step by step procedure of developing the block diagram in Labview

TECHNICAL SPECIFICATIONS

· Parallel Port

# 25 pin Female D Connector provided to connect to the parallel port of PC

# 8 pin data port, 5 pin status port and 4 pin control port provided for interfacing to various applications

· Microcontroller

# 51 series Microcontroller

# 9 pin Female D Connector to connect the serial port of the PC.

# 4 bit DIP Switch to select the program to be executed

# 8 pin Data port, 5 pin Status port and 4 pin Control port provided on connectors to connect to various applications

· 82C55 Interface

# Port A, Port B and Port C provided on connectors to connect various applications

# LED’s provided for all port lines to indicate the status.

# 8 pin Data port and 4 pin Control port provided on connectors to interface 82C55 to parallel port or serial port ( uC )

· LCD Display

# 16 x 2 LCD display with back light

# back light control

# 8 pin Data port and 4 pin Control port provided to interface to parallel port, serial port ( uC ) or 82C55

· Analog to Digital Controller

# 8 bit ADC

# Provision to connect Internal or External analog voltage source

# 8 bit Data lines provided on Data port for interfacing with parallel port, serial port ( uC ) or 82C55

# ADC control lines like RD, WR and INTR provided on connectors

· Digital to Analog Converter

# 8 bit DAC

# 8 data lines provided on Data port for interfacing with parallel port, serial port ( uC ) or 82C55

· Seven Segment Display

# Common Cathode type

# All segments including ‘ . ‘ are provided on Data port through buffer for interfacing with parallel port, serial port ( uC ) or 82C55.

· Stepper Motor

# +12V DC, 1.8o, 200 steps, Unipolar type

# ULN Driver

· Data Switch 1

# 4 SPST Switches

# Pull up resistors

# Switch status available on Connector with pin1 open

· Data Switch 2

# 5 push switches provided with normal High output

# Pull up resistors

# Switch status available on 5 pin connector

· LED’s

# 8 LED’s

# Control of LEDs on 8 pin Data port for interfacing to Parallel port, Serial port ( uC ) or 82C55

LABVIEW SOFTWARE TO BE AVAILABLE WITH THE COLLEGE

SPECIFICATIONS ARE SUBJECT TO CHANGE DUE TO CONSTANT DEVELOPMENTS WITH OUT ANY PRIOR NOTICE